The following accessories are available for the full range of Magnum Parallel Grippers.
Sensor Systems
The complete range of sensors are available as part of the MAGNUM gripper system. All kits shown
below work on all models (130 & 450). To order the mounting hardware only for the
types of sensors shown below use #M-Kit-HWO. To order mounting hardware for a 12mm
proximity on the model 450 use #M-KIT-HWO-450-12mm.
A MAGNUM gripper with two Inductive Proximity Switches Installed (M-Kit-Ind-Sink)
ACCESSORIES (Field Installable) |
|
|
Applicable Models |
M-Kit-Ind-Sour |
Inductive Prox w/LED |
DC Sourcing - PNP |
All Models |
M-Kit-Ind-Sink |
Inductive Prox w/LED |
DC Sinking - NPN |
All Models |
M-Kit-Reed |
Reed w/LED |
MOV Protection |
All Models |
M-Kit-Hall-Sink |
Hall Effect |
DC Sinking - NPN |
All Models |
M-Kit-HWO |
Hardware Only |
Mounts any of above |
All Models |
M-Kit-HWO-450-12mm |
Hardware Only |
Mounts 12mm prox |
Model 450 ONLY |
M-Kit-AFS-450-26 |
Fail Safe |
Active |
Model 450 ONLY |
|
|
|
Call us at 440-324-2814 : FAX 440-324-3552 email support@grippers.com PO Box 1660 : Elyria, Ohio 44036 U.S.A. © Copyright 1996 through 2008 ZAYTRAN, Inc All Rights Reserved. MAGNUM and XRAY Are Registered Trademarks of ZAYTRAN, Inc.
Grippers Home |
Magnum Grippers
|
XRAY Grippers
|
XRAY-S Grippers |